For many homeowners, the garage door is one of the most used features on their property. However, it is often the least maintained compared to other features, so they tend to get overlooked.
The fact is that most people often wait for something to go wrong before contacting a New York garage door repair professional. Unfortunately, this can lead to bigger future problems and cost a lot of money to fix. In this blog, we’ll discuss the most common problems with garage doors and how to prevent them. We’ll also provide how you can get it fixed by a garage door repair company in New York company if necessary.
Read on to learn more about some of the most common issues with garage doors and their solutions.
The Garage Door Won’t Close Tightly
If your garage door isn’t closing tightly, there are a few things you can do to try and fix the problem. First, check the tracks to make sure they are clean and free of debris. If your tracks are dirty, clean them first with a soft cloth.
Next, check the rollers of your garage door to see if they are loose or damaged. If they are, replace them with new ones. Finally, Adjust or replace the springs if they need it. If your garage door still isn’t closing tightly after doing all these things, then you may need to call a garage door repair Putnam County company.
Worn-Out Door Springs
It’s important to replace the worn out springs of your garage door as soon as possible.Otherwise, your garage door won’t be able to function properly and could cause serious damage to your home. Common types of springs that garage doors use are torsion springs and extension springs.
Torsion springs are located above the door, while extension springs are located below. To replace either type of spring, you’ll need to disconnect the cables that connect the spring to the door. Once the cables are disconnected, you can remove the old spring and install a new one in its place. Be sure to use the same type of spring that was originally installed on your door.
Squeaky Rollers or Bearings
If your garage door starts to make a squeaking noise, it is likely due to the rollers or bearings. These parts can wear down over time, causing the door to become less smooth and noisier when opened or closed.
There are a few things you can do to try and fix the problem of squeaky rollers or bearings. First, check to see if the rollers or bearings are dirty or dry. If they are, simply clean them with a cloth or brush. If this doesn’t solve the problem, you may need to lubricate the rollers or bearings with light oil.
Once you’ve done this, try opening and closing the garage door to see if the squeaking has stopped. It’s possible that someone will need to replace the damaged rollers or bearings.
The Garage Door Opens or Closes Too Slowly
One of the most common problems people have with their garage doors is that they open or close too slowly. This can be frustrating, especially if you’re in a hurry to get in or out of your garage. To discover the cause of slow garage door opening or closing, several steps can be taken.
First, check to see if the tracks that the door runs on are dirty or blocked. If they are, clear them off and see if that fixes the problem. If not, there could be an issue with the springs that help lift the door. A professional garage door company may need to adjust or replace them.
Lastly, ensure there is nothing blocking the sensors telling the door when to stop moving. If something is blocking them, the door may think it’s already closed and won’t open or close properly.
Remote Control or a Keypad That Doesn’t Work
It could be because the batteries are dead or there’s a loose connection that’s why your remote control doesn’t work. First, check the batteries in the remote control or keypad. If they are low or need to be replaced, that could be why it’s
not working. Second, check to make sure the remote control or keypad is properly paired with the garage door opener.
If it’s not, you’ll need to pair the remote control with your garage door once again. To do that, consult your garage door opener’s manual for instructions. Finally, if neither of those solutions works, you may need to call a professional for this one. They’ll need to come and look at your garage door opener and see if there is a more serious issue.
Conclusion
As a homeowner, it’s important to maintain your garage door to avoid any damage to your property. A garage door is a heavy piece of machinery, and if not properly maintained, it can cause serious damage to your home. If you have a garage door that is not working correctly, you should have it repaired or replaced as soon as possible.
For situations where you think you need professional help, do not hesitate to contact experts right away. This will prevent further damage to your garage door and will maintain the security of your property as well.
Contact On Track Garage Doors Today for a FREE Estimate!
If you’re having problems with your garage door, don’t hesitate to contact On Track Garage Doors today. We have a team of experienced professionals who are ready to help you with any issue you may be experiencing.
No matter what the problem is, we work quickly and efficiently to get your garage door back on track. We understand the importance of having a functional garage door, and we’re here to get it working properly again.
Contact us today at (914) 690-7875 for a FREE estimate or a repair appointment. We at On Track Garage Doors look forward to helping you get your garage door back in working order!